Data sheet

Specification

General
Function	Temporary and mobile traffic surveys
Typical applications	Traffic survey (traffic counting & turning movement counting)
Captured object classes (model traffic & parking)	12+1 (see object classes)
Detection accuracy* (model traffic & parking) *) optimal alignment and calibration	Counting >95% Classification Main classes >95% Sub-Classes >85%
Speed estimation *) optimal alignment and calibrated system with a 10m section.	±10% deviation for speeds < 60 km/h ±15% deviation for speeds < 100 km/h ±20% deviation for speeds < 130 km/h
Object speed	< 130 km/h
Day / Night	Yes / Yes (with IR-illumination)
Mounting
Mounting type	On poles using mounting brackets and tensioning straps
Protection	Tensioning straps and battery secured with lock
Distance	Distance 5-30m (Cars, Trucks) 3-15m (Persons, Bicycles, Scooters)
Height	Height up to 6m Note: A higher mounting position can help minimize obstruction by large vehicles.
Horizontal Angle	Horizontal Angle 0°-360° Note: An angle of approximately 15° provides better classification results, as more object details become visible from the side (e.g., wheels, axles, etc.).
Battery/charger
Capacity	100 Ah
Output voltage	12 V
Max. runtime (during survey)	110 h (~4.5 d)
Max. runtime (standby)	245 h (~10 d)
Max. charging time	7.5 h
Connectivity
Technology	LTE
Protocol/Format	MQTT / JSON (event schema)
Environmental conditions
Temperature range	-20 °C to +50 °C
Protection class	IP65
Dimensions
Transport length of pole (retracted)	1.78 m
Maximum height	6.05 m
Weight BMA	1.4 kg
Weight telescope pole with mounting bracket	2.1 kg
Weight battery box	14.9 kg

Data protection and security

The BMA processes personal data only vaguely, without storing it and only for the purpose of anonymization. This is done on the basis of Art. 6 para. 1 f) GDPR, namely in the legitimate interest of the operator. Only the anonymous data is then used to carry out traffic management. The BMA complies with the Low Voltage Directive 2014/35/EU and the Electromagnetic Compatibility Directive 2014/30/EU. This resulting CE certification is attached to the bottom of the device.

Disclaimer

Note

The supplier assumes no liability for compliance with local requirements or additional certifications that may be required in certain regions or markets. It is the responsibility of the purchaser or user to ensure that the product complies with local regulations and specific requirements that may go beyond the specified certifications. The supplier disclaims all liability for any damage or loss that may result from non-compliance with such additional requirements.