LogoLogo
English
English
  • General
    • About this documentation
    • What's new
      • 2025.2
      • 2025.1
        • 2025.1 U3
        • 2025.1 U2
        • 2025.1 U1
      • 2024.5
        • 2024.5 U1
      • 2024.4
      • 2024.3
  • Products
    • BERNARD Mobility Analyser (BMA)
      • Data sheet
      • Scope of delivery
      • Mounting
    • Mobile BERNARD Mobility Analyser (BMA)
      • Data sheet
      • Scope of delivery
      • Installation
      • Charge battery box
    • BERNARD Character Analyser (BCA)
      • Datasheet
      • Scope of delivery
      • Installation
        • Alignment of the BCA
    • BERNARD Mobility Controller (BMC)
      • Data sheet V2.2
      • Operating instructions V2.2
    • B101 & B401
      • Scope of delivery
      • Data sheet
      • Installation
  • Solution areas
    • Traffic survey
      • Traffic counting
        • Tips for Optimizing Counting Accuracy
      • Turning movement counting
      • Traffic Flow
    • Adaptive traffic control
    • Parking
      • Barrier-free parking
      • Single space parking
  • Control Center
    • Devices
      • Configuration
        • Object classes
      • Device health
      • Schedule
      • Device monitoring
    • Administration
      • Monitoring alerts
      • License management
      • Device update
      • User management
    • Control center API
      • Data analytics API
  • Data Center
    • Counting
      • Configuration of the survey
      • Data analysis
    • Traffic Flow
      • Configuration of a Traffic Flow survey
      • Data analysis
    • Data Center API
  • Bernard Technologies GmbH
    • Support Center
    • Terms and Conditions
Powered by GitBook
On this page
Export as PDF
  1. Products
  2. Mobile BERNARD Mobility Analyser (BMA)

Charge battery box

To ensure successful charging of the battery box, the following steps must be followed in the order indicated:

  1. Charger is disconnected from the mains (must not be connected to 230 VAC!)

  2. Connect charger and rechargeable battery

  3. Connect charger to mains (230 VAC)

  4. <Charging in progress...>

    • Bulk LED = charging in progress

    • Absorption LED = charging in progress

    • Storage LED = charging process completed

  5. Disconnect charger from mains (must not be connected to 230 VAC)

  6. Wait <30 seconds>

  7. Disconnect charger and battery

  8. Test: After successful charging, the voltage of the battery should be at least 13.5 VDC

PreviousInstallationNextBERNARD Character Analyser (BCA)

Last updated 9 months ago